Product: Stainless Steel CZ solitaire ring blank for resin.  Ideal to set ashes for memorial jewellery into the shoulders of the ring, either side of the stone.

Material: Stainless Steel
Stone Size: 6mm
Stone height: 6mm (from inside ring to top of stone).
Ashes setting size: Approx. 2.5mm (at it's widest point) x 10mm. 1.5mm deep.
Please note that setting sizes may vary slightly depending on the ring size.

This item is currently available in Size K-V (see notes below)

Due to the nature of stainless steel, please be aware that it is normal to have very slight movement of the stone. If it is able to twist within the setting, this is ok and would not be considered a fault.
Stainless steel is stronger than silver or gold, however the prongs can still work loose over time if not properly cared for.

I recommend this item is removed for exercise, DIY or heavy housework as well as for sleeping, dressing and undressing.

The most common reason for loose prongs (leading to lost stones) is getting them snagged on clothing. Therefore please also remove the ring before going to bed and for showering/bathing or any activity which would involve changing clothing.

Notes Regarding Ring Sizing

All ring blanks are supplied in the sizes stated by the manufacturer and are checked against our in-house UK mandrel prior to dispatch.

Please note that these rings are manufactured overseas and UK size conversions are not always exact. A tolerance of up to ½ UK size is considered acceptable due to manufacturing variation.

Minor measurement differences when checked on alternative mandrels are normal within the jewellery industry. Sizing disputes based solely on comparison with a different mandrel will not be accepted as evidence of an incorrect item where the ring matches the manufacturer’s stated size.

If a different size is required, exchanges are available for unused items returned in original condition. All postage costs are the responsibility of the buyer unless an error in dispatch has been confirmed.